ALWAYS DIG WITH CAUTION

• Risk of property damage, death, or serious injury may result if buried pipes, and cables are not properly located before digging.
• Read and follow all instructions and warnings in the owner’s guide before using the C.A.T4 and Genny4.
• Regularly check your C.A.T4 and Genny4, in all modes, over a cable which gives a response you are familiar with.
• Some power cables DO NOT radiate detectable power signals.
• Power and Radio signals may not be present. It is advisable to use the Genny4 whenever searching for pipes and cables.
• Do not use the C.A.T4+/eC.A.T4+ depth estimation function to decide if mechanical digging over a buried conductor is appropriate.
• StrikeAlert™ may not activate even if a live power cable is present.
• The presence of ‘StrikeAlert Activated’ or ‘CALSafe Enabled’ labels do not guarantee that the relevant feature is activated.
• Keep mobile phones away from cable and pipe locators when in operation. Minimum distance 60cm/24″ recommended.
• The C.A.T4 cannot indicate whether a signal comes from a single conductor or from several cables or pipes bundled or buried in close proximity to each other.
• Call your local support number (available from: (www.radiodetection.com) for questions regarding the proper use, maintenance, and repair of the C.A.T4 and Genny4.
• It is recommended that the C.A.T4 and Genny4 are serviced at least once a year and have their calibration validated using Radiodetection approved test equipment. Radiodetection will accept no responsibility for repairs carried out by unauthorized repairers.
• Even if using a C.A.T4 and Genny4, ALWAYS DIG WITH CAUTION.